Frying; Preparation; Frying Foodstuffs - Silvercrest KH 2001 Operating Instructions Manual

Frying

We recommend frying oil or liquid frying fat for use
in this deep fryer. You can also use solid cooking
fats. For this, first read the chapter „Solid Cooking
Fats".

Preparation

1. Place the appliance on a horizontal, level and
stable surface.
Note:
If you wish to place the deep fryer below the extraction
fan of the cooker, ensure that the cooker is switched
off.
2. Unwind all of the power cable from the power
cable retainer 7.
3. Open the appliance lid by pressing on the lid
release button 6. The appliance lid flips open.
4. Pull the handle upwards until it audibly engages.
Remove the frying basket 3.
Note:
Only use oils or fats which are expressly marked as
non-foaming and are suitable for deep frying. This
information is to be found on the packaging or the
labelling.
5. Fill the dry and empty stainless steel container 4
of the deep fryer with cooking oil or liquid or
molten fat (approx. 3 l oil or approx. 2,5 kg
solid fat) up to the MAX marking.
Note:
When charging the stainless steel container 4 with
fat, NEVER fill it to above the MAX marking or to
below the MIN marking.
NEVER mix different types of oil or fat!
The deep fryer could froth.
6. Insert the plug into the mains power socket.
The power cable may not make contact with
the hot areas of the deep fryer. Risk of electric
shock!
7. Replace the frying basket 3.
8. Close the appliance lid.
9. Push the handle locking button w downwards
and lower the handle.

Frying foodstuffs

1. Switch the deep fryer on with the On/Off switch 0.
The control lamp integrated into the On/Off
switch 0 starts to glow.
2. Turn the temperature controller 8 to the required
temperature. The cooking oil or the fat is now
heated up to the required temperature. When
the required temperature has been reached the
green control lamp 9 starts to glow.
Note:
The correct frying temperature is to be found either
on the food packaging or from the table in these
operating instructions.
3. Pull the handle upwards until it audibly engages.
4. Open the appliance lid by pressing on the lid
release button 6.
5. Remove the frying basket 3 and place into it the
food to be fried.
6. Carefully replace the frying basket 3 into the
deep fryer.
7. Close the appliance lid. This must click in audibly.
8. Push the handle locking button w downwards.
The handle now allows itself to be lowered. The
frying basket 3 is at the same time lowered into
the hot oil or fat.
Note:
The frying process can be overseen through the
viewing window 1 in the appliance lid.
- 40 -