Troubleshooting; Disposal; Disposal Of The Appliance - Silvercrest 427247 2301 Operating Instructions Manual

Troubleshooting

PROBLEM
The appliance is not
working.
or
The Power control lamp 0
does not light up.
The Ready control lamp 9
does not light up.
If the malfunction cannot be corrected with the above suggestions, or if you have found some
other kind of malfunction, please contact our Customer Service department.

Disposal

Disposal of the appliance

The adjacent symbol of a crossed-out dustbin means that this appliance is subject
to Directive 2012/19/EU. This directive states that this appliance may not be
disposed of in the normal household waste at the end of its useful life, but must
be taken to specially set-up collection locations, recycling depots or disposal
companies.
The disposal is free of charge for the user. Protect the
environment and dispose of this appliance properly.
If your old appliance has stored any personal data, you are responsible for
deleting it yourself before returning it.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
■ 16 │ GB │ IE │ NI │ CY
POSSIBLE CAUSE
The appliance is not connected
to a mains power socket.
The appliance is damaged.
The On/Off switch 8 has not
been activated.
The thermal cut-out has been
triggered.
The selected temperature for
the cooking oil/fat has not
been reached.
POSSIBLE
SOLUTIONS
Connect the appliance to
a mains power socket.
Contact the Customer
Service department.
Press the On/Off switch 8.
Switch the device off at
the On/Off switch 8 and
disconnect the mains power
plug from the mains power
socket. Wait until the appli-
ance has cooled down.
Wait a few minutes until the
required temperature has
been reached.
SEF3 2000 C4