Turning Off The Projector - Epson EB-770F User Manual

6 Moves to the previous or next page if there are more available input sources
7 Displays the projector name and the projector keyword
8 Displays the current time
Note: The Home screen closes after 10 minutes of inactivity.
Parent topic:

Turning Off the Projector

Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
1. Press the power button on the projector or remote control.
The projector displays a shutdown confirmation screen.
2. Press the power button again. (To leave it on, press any other button.)
The projector beeps twice, the laser turns off, and the Status light turns off.
Note: If the Light Source Calibration (EB-770F/EB-775F) setting is set to Run Periodically in the
projector's Management menu, light source calibration starts automatically if you turn off the
projector and the following conditions are present:
• 100 hours have passed since the last light source calibration.
• You have used the projector continuously for at least 20 minutes.
Turning On the Projector
96