Turning On Dynamic Contrast - Epson EB-770F User Manual

1 Brightness level
2 Time the projector can maintain constant brightness (approximate)
Brightness Level setting
85%
80%
70%
Note: The light source usage hours vary depending upon environmental conditions and usage. The
hours listed here are an approximate and are not guaranteed. You may need to replace internal parts
sooner than the estimated light source operation time. If Maintain Brightness is turned on, and you
have exceeded the usage hours listed here, you may not be able to select a high Maintain Brightness
Level setting (EB-770F/EB-775F).
Parent topic:

Turning On Dynamic Contrast

You can turn on the Dynamic Contrast setting to automatically optimize the image luminance. This
improves the image contrast based on the brightness of the content you project.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button on the projector's control panel or remote control.
Hours
6000 hours
10000 hours
19000 hours
Adjusting the Projector's Brightness Level
132