Epson PowerLite EB-720 Quick Setup

PowerLite EB-720/EB-725W
®
Quick Setup
IMPORTANT: Before using the projector, make sure you read these instructions
and the safety instructions in the online User's Guide.
Note: Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Connect the projector
Computer
Choose from the following connections. See the sections below or the online
User's Guide for details.
HDMI port
Connect one end of an HDMI cable to one of the projector's HDMI ports and
the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to one of the projector's Computer ports, and
the other end to your computer's
switch it to external display (see "Troubleshooting"). You can also connect an
audio cable.
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows 7 or later: After turning on the projector, follow the on-screen
®
instructions to install the Epson USB Display software (EMP_UDSE.EXE; only
®
on first connection). If the software screen does not display automatically, open
My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.
OS X 10.8.x or higher: After turning on the projector, the setup folder for USB
Display appears in the Finder. Double-click USB Display Installer and follow
the on-screen instructions to install the Epson USB Display software (only on
first connection). If the software screen does not display automatically, double-
click EPSON_PJ_UD, then double-click USB Display Installer.
External monitor and speakers
You can connect an external monitor and external speakers to your projector to
enhance your presentations. See the online User's Guide for details.
Wired network
Connect the projector to your network using an Ethernet cable. See "Wired
network configuration" for more information.
VGA cable
USB cable
HDMI cable
monitor port. If you are using a laptop,
Microphone
Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable.
Video device
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them. For more information on
playing sound through the projector, see the online User's Guide.
Component video
to VGA cable
HDMI cable
Camera, USB device, or document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector's USB-A (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's PC Free feature. You can also connect other Epson document
cameras to the projector. See the online User's Guide for details.
RCA video cable
Audio cable
(composite video)
USB cable