Maytag Amana SXV9 Series Service And Troubleshooting page 61

SERVICING
SCREEN 3 (SETTING MODE 1)
Setting Contents
No.
1 Cool Airflow Trim High
2 Cool Airflow Trim Int
3 Cool Airflow Trim Low
4 Cool Profile
5 Cool Fan ON Delay
6 Cool Fan OFF Delay
7 Dehumidification Select
13 Airflow Trim Offset
14 Zoning Selection
15 Circulation Selection
NOTE: Parameters as per factory setting are highlighted in bold and underlined.
*1 *SXV906010** with **VC960804C, **VM970804C and *MVC800804C combination trim more than 5% settings are invalid.
Trimmed up CFM makes mismatching error.
*2 Depending on the connected indoor unit, there are restrictions on the positive side Trim setting.
If you want to change the Cool Airflow Trim to positive side, be sure to confirm the Airflow Trim restrictions in the latest manual.
The latest manual can be obtained from the website "PartnerLink(InfoFinderPlus/Literature)".
[PartnerLink URL]
https://partnerlinkmarketing.goodmanmfg.com/goodman/info-finder-plus
*3 The Inverter system uses lower compressor speed and lower indoor unit CFM to optimize system performance.
To obtain 100% CFM for home circulation, use full Trim setting instead of Int/Low speed.
This is recommended for applications with unusually cold return temperatures such as basements.
*4 Please refer to the page of "Dehumidification Select" for details of this function.
0: -15% 2: -5%
*1,*2
1: -10% 3: 0%
0: -15% 3: 0%
1: -10% 4: 5%
2: -5% 5: 10% 8: 30%
0: -15% 3: 0%
1: -10% 4: 5%
2: -5% 5: 10% 8: 30%
0: A 1: B
0: 5sec. 1: 10sec. 2: 20sec. 3: 30sec.
0: 30sec. 1: 60sec. 2: 90sec. 3: 120sec.
0: STD 2: A
*4
1: OFF 3: B
0: 0% 1. +2.5%
*1,*2
0: ON 1: OFF
0: ON 1: OFF
Setting
4: 5% 6: 15%
5: 10%
6: 15% 9: Full (Max)
*3
7: 20%
6: 15% 9: Full (Max)
*3
7: 20%
2: C 3:D
4: C
7-SEGMENT DISPLAY
Installer / Serviceman Notes
Used for additional trim setting by
adding 2.5% to basic airflow trim
setting. This setting affects all trim
settings except +15% High (cooling
or heating).
61