JLG TOUCAN 861 Service Manual page 8

INTRODUCTION
FOREWORD
This handbook has been compiled to assist you in properly operating and
maintaining your Aerial Work Platform Model
Toucan861.
It contains detailed descriptions of control and maintenance procedures to be
performed by the user, including their periodicity.
It also contains technical information and procedures enabling a qualified
personnel to detect possible failures and perform the necessary adjustments
or repairs.
Verify that this manual corresponds to the work platform model you will be
maintaining.
Before any maintenance on the work platform, you must read and understand
the operating and safety procedures described in the corresponding Operator's
and Safety Handbook.
To perform the maintenance procedures described in this manual, a basic
knowledge in mechanics, hydraulics and electricy is necessary.
Certains procedures require specific competences, tooling, and handling
equipment. We therefore recommend that these repair and maintenance
procedures are carried out only by authorized and qualified personnel.
Constant improvement make it necessary that JLG reserve the right to make
specification and equipment changes without notice.
If you have any questions on operating, maintenance procedures, contact your
authorized JLG distributor.
Models
Toucan 861
8
Updated 04-06