Commissioning; Function Check; Switching On The Measuring Device - Endress+Hauser Levelflex M Brief Operating Instructions

Commissioning

5 Commissioning
5.1

Function check

Make sure that all final checks have been completed before you start up your measuring point:
• Checklist "Post-installation check".
• Checklist "Post-connection check".
5.2

Switching on the measuring device

When the instrument is switched on for the first time, the following messages appear in a
sequence of 5 s on the display: software version, communication protocoll and language
selection.
ENDRESS + HAUSER
– +
E
22
⇒
Levelflex M FMP43 with FOUNDATION Fieldbus
⇓
⇓
⇓
Select the language
(this message appears the
first time the instrument
is switched on)
Select the basic unit
(this message appears the
first time the instrument
is switched on)
The current measured
value is displayed
F
After is pressed, you
reach the group selection.
This selection enables you
to perform the basic setup
Endress+Hauser