Panasonic KX-TVS80 Installation Manual page 245

Parameter
Message
Scanning with
Information
Prompt Mode
Remote Call
Forward to CO
Delete
Message
Confirmation
Authorization
for Message
Notification
Installation Manual
All manuals and user guides at all-guides.com
Value Range
(Default)
1. Yes If set to "Yes", the VPS adds the message sender's name and
2. No the recording date and time to the message during the
(No) message scan.
1. System Specifies the language used for voice prompts.
2. User 1
3. User 2
Note: If User 1 or User 2 is specified as Prompt Mode but
(User 1)
not recorded by the Message Manager, the VPS will
automatically play the factory-recorded System prompts in
English. By default, User 1 and User 2 prompts are not
recorded.
1. Yes If set to "Yes", Remote Call Forwarding can be set to an
2. No outside (CO) line; the Message Manager can program
(No) (either from a remote location or on-site) his extension to
forward various types of calls to either "Telephone No.1" or
"Telephone No.2" (preprogrammed in the Mailbox Setting),
or to any other telephone number.
Note: The Remote Call FWD to CO feature is available if
DPT Voice Mail Integration is activated with a Panasonic
KX-T series telephone system.
Important Note: With respect to PBX programming, it is
possible that "Call Forward to CO" is disabled. To enable
VPS Remote Call Forwarding, the KX-TD1232, for
example, must be programmed properly. For the COS of the
extensions whose calls are to be forwarded to a CO line,
enable the following: [504] Call Forward to Outside Line.
1. Yes If set to "Yes", the VPS requests confirmation from the
2. No mailbox owner before erasing a message left in the mailbox.
(No) If set to "No", the message is erased immediately.
1. Yes If set to "Yes", the Message Manager is able to utilize the
2. No Message Waiting Notification feature. The sub-parameters
(Yes) to be set include Beeper Callback No. Entry Mode, MWL
Notification for Unreceived Message, and Device
Notification for Unreceived Message. If set to "No", sub-
parameters cannot be assigned.
SYSTEM ADMINISTRATOR'S GUIDE
Table 41
Description/Function
245