Connecting The Vps With The Panasonic Kx-Td816, Kx-Td1232, Kx-Ta1232 And Kx-Td308; Kx-Td1232 Software Verification And Programming For Dpt Integration Via The Manager's Extension - Panasonic KX-TVS80 Installation Manual

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
4.4 CONNECTING THE VPS WITH THE
PANASONIC KX-TD816, KX-TD1232, KX-
TA1232 AND KX-TD308
Notes
• Do not use system programs [106] or [602] for DPT Integration.
• The next 2 sections (4.4.1 KX-TD1232 Software Verification and Programming for DPT
Integration via the Manager's Extension and 4.4.2 KX-TD1232 Software Verification and
Programming for DPT Integration via the Operating and Maintenance Tool) are for the KX-
TD1232 as examples. Please refer to them for the KX-TD816 or KX-TA1232.
• And the following Section (4.4.3 KX-TD308 Software Verification and Programming for
DPT Integration via the Manager's Extension) is for the KX-TD308.
4.4.1 KX-TD1232 Software Verification and Programming for DPT
Integration via the Manager's Extension
It is important that the KX-TD1232 has the proper software level to allow DPT Integration with
the VPS. Follow the procedures below to confirm the software level, then complete the required
programming before starting up the VPS.
Note
Two methods of programming are available on the KX-TD1232. The instructions below
show how to program without the operating and maintenance tool. For instructions on
programming with the operating and maintenance tool, please see 4.4.2 KX-TD1232
Software Verification and Programming for DPT Integration via the Operating and
Maintenance Tool.
All of the following procedures must be done after entering system programming. Refer
to the KX-TD1232 Programming Guide or Installation Manual for instructions on how
to enter the system programming mode.
Software Verification
1.
Verify Software—If you are configuring a 2-cabinet system, remember to check both
cabinets. The software must be the same in each. Check the software version of the KX-
TD1232 using System Program [116].
Example: P231UYMMDDA
The underlined digits represent the software production date code (year, month, day). For
DPT Integration, the software version of the PBX must be P231U or higher.
(For KX-TD816, the version must be P301O or higher; for KX-TA1232, the version must
be P831AA or higher.)
92
All manuals and user guides at all-guides.com
Installation Manual