Panasonic KX-TVS80 Installation Manual page 141

Description
Operator's
Extension
Operator's
Mailbox No.
Operator No
Answer Time
Busy
Coverage
Mode
Installation Manual
All manuals and user guides at all-guides.com
Value Range
(Default)
1-5 Digits
(0)
2-5 Digits
(998)
10-60 s
(30)
1. Hold
2. No Answer Coverage
3. Call Waiting
4. Disconnect Message
(Hold)
CUSTOMIZING THE SYSTEM
Table 24
Description/Function
Specifies the extension number for Operator 1.
[Notes]
• The default setting (0) cannot be used with the
Message Waiting Notification—Lamp feature
and the Remote Call Forwarding Set feature.
When using these features, you must assign the
extension number that is included in the
Extension Numbering Plan.
• The extension number must not be assigned
anywhere else (in particular, the extension must
not have a mailbox). Otherwise, you will get an
error message.
Callers to Operator 1 are prompted to leave a
message in this mailbox depending upon how the
Busy Coverage or No Answer Coverage modes are
set.
When a call to Operator 1, 2, or 3 is not answered
within the time set, the VPS will offer other options
as defined by the "No Answer Coverage Mode".
[Notes]
• This timer applies to Operator 1, 2, and 3.
• If more than 1 operator is assigned, we
recommend to reduce the time on the "Operator
No Answer Time" to 15 s.
Specifies how to handle calls when the Operator 1
extension is busy.
1. Hold—Automatically places the caller on hold
and the Operator 1 extension is called again.
2. No Answer Coverage—Offers the option
specified by the No Answer Coverage Mode to
the caller.
3. Call Waiting—Signals the Operator 1 when
another call is waiting using the Call Waiting
feature of the PBX.
4. Disconnect Message—Disconnects the caller
after playing "Thank you for calling."
141