Panasonic KX-TVS80 Installation Manual page 241

Parameter
Remote Call
Forward to CO
Delete
Message
Confirmation
Number of
CIDs for Caller
Name
Announcement
Personal
Greeting for
CID
Caller ID
Screening
Authorization
for Message
Notification
Installation Manual
All manuals and user guides at all-guides.com
Value Range
(Default)
1. Yes If set to "Yes", Remote Call Forwarding can be set to an
2. No outside (CO) line; a subscriber can program (either from
(No) a remote location or on-site) his extension to forward
various types of calls to either "Telephone No.1" or
"Telephone No.2" (preprogrammed in the Mailbox
Setting), or to any other telephone number.
Note: The Remote Call FWD to CO feature is available
if DPT Voice Mail Integration is activated with a
Panasonic KX-T series telephone system.
Important Note: With respect to PBX programming, it
is possible that "Call Forward to CO" is disabled. To
enable VPS Remote Call Forwarding, the KX-TD1232,
for example, must be programmed properly. For the COS
of the extensions whose calls are to be forwarded to a CO
line, enable the following: [504] Call Forward to Outside
Line.
1. Yes If set to "Yes", the VPS requests confirmation from the
2. No mailbox owner before erasing a message left in the
(No) mailbox. If set to "No", the message is erased
immediately.
0-30 Specifies the maximum number of Caller IDs which
(30) subscribers can assign for the Personal Caller Name
Announcement.
1. Yes If set to "Yes", subscribers can utilize the personal
2. No greeting feature for Caller ID.
(Yes)
1. Yes If set to "Yes", subscribers can utilize the Caller ID
2. No Screening feature.
(Yes)
1. Yes If set to "Yes", subscribers are able to utilize the Message
2. No Waiting Notification feature. The sub-parameters to be
(No) set include Beeper Callback No. Entry Mode, MWL
Notification for Unreceived Message, and Device
Notification for Unreceived Message. If set to "No", sub-
parameters cannot be assigned.
Note: This parameter in COS No.1 is set to "Yes" when
the Quick Setup procedure is used to create Subscriber
Mailboxes.
SYSTEM ADMINISTRATOR'S GUIDE
Table 40
Description/Function
241