Riello PRESS 45 N/ECO Installation, Use And Maintenance Instructions page 24

2. TECHNICAL DATA
2.1 TECHNICAL DATA
TYPE
Thermal power - Flow rate
Fuel
Electrical supply
Motor 230V - 400V
Ignition transformer
Heaters
Electrical intake power
Pump
2.2 DIMENSIONS
Boiler plate
D2628
NOTE
The weight of the rear part of the pumping assembly exerts flexure stress on the guides; you are advised
to hold the burner while it is being extracted so as not damage the flame disc and the said guides.
For long - head version.
*
Use the pin extensions provided to move the burner back.
2.3
FIELD OF OPERATION (2 nozzles in operation)
When the burner operates with only one nozzle, the pressurization conditions are better and no problems
arise. Minimal flow rate with one only nozzle: 10 kg/h - 114 kW.
6193
627 T
114/205 - 513 kW –
Oil with max. viscosity at 50° C 115 sq. mm/sec (15° E)
±
Three-phase, 230 V
±
400 V
Fan: 2.4A - 1.4A
Pump: 2.1A - 1.2A
Primary 2 A – Secondary 2 x 6.5 kV – 35 mA
2.8 kW
4.1 kW
60 kg/h at 20 bar
783
370
94
Burner capacity
2
GB
10/18 - 45 kg/h
~
10%
50Hz without neutral
~
10%
50Hz with neutral
Burner
235
*
D2673
kg/h
kW
625
290
D2715