CONTROL OVERVIEW
Interaction with the water heater controller is through an UIM Touch Display called the User Interface
Module (UIM). This screen is also referred to as the "desktop" or "desktop menu".
While the water heater is operating, the user interface will display the UIM screen (if there are no active
faults or warnings).
An example of this screen is shown below.
•
The first temperature on this screen is the temperature of the water inside the tank.
•
The second temperature on this screen is the Operating Set Point. The Operating Set Point is the
temperature at which the water heater will maintain the water inside the tank.
•
The third line on the screen is a text description of the Operational State of the water heater. The
operational state of the water heater is also indicated graphically by status icons.
LCD Screen
Information
Display
Status Icons
Operational buttons are multi functional. Their current function is defined by
the text that appears directly above each button on the LCD screen.
UIM (User Interface Module)
Tank Temperature
Operating Set Point
Status: Heating
MENU
(UIM) User Interface Module Screen
Servicing should only be performed by a Qualified Service Technician
103°F
120°F
OFF
O
GAS
N
HELP
Title Bar
51