Cleaning Method; Inside Water Tank - Coway CHP-06DL User Manual

CLEANING METHOD

▶ Inside water tank

Close the water supply valve, press the cold
1
water button at the front of the product for 3
seconds to turn off the cold water function,
and completely drain the
cold/room-temperature water
by selecting continuous cold
water extraction mode.
Open the drain door, and remove the red drain
2
safety cap. Using the drainage hose, completely
discharge all the hot water in the tank, and
store the water. When the water
is completely drained, pull out
the power cord.
Open the top cover of the product, and open the water drum
3
cover inside the product.
�
Remove the ceramic filter
4
from the bottom part of
the water drum cover,
and clean by agitating in
room-temperature water.
26
�
�
�
�
�
�
Clean the surface of the water drum with a
5
soft cloth.
Rinse the water drum with
6
the previously stored room-
temperature water, plug the
power in, and completely
drain the rinsing water using
the cold water continuous
extraction function.
Fix the ceramic filter underneath the water drum cover, and
7
close the water drum cover.
�
�
Close the top cover and then connect the power cord
8
before opening the main water supply valve. After
checking water extraction from the faucet of the
cold/room water and hot water, press the cold water
selection switch in front of the product for re-operation.
Please close the cover of the storage
tank completely.
Ants or other substances might get inside.
�
�
27