Typematic Delay (Msec); Security Option; Apic Mode; Mps Version Control For Os - Advantech PCA-6186VE User Manual

Table of Contents

3.4.11 Typematic Delay (msec)

Typematic delay is the time interval between the appearance of two con-

secutive characters, when holding down a key. The input values for this

category are: 250, 500, 750, 1000 (msec).

This setting determines whether the system will boot up if the

password is denied. Access to Setup is always limited.

System

The system will not boot, and access to Setup will be denied

if the correct password is not entered at the prompt.

Setup

The system will boot, but access to Setup will be denied if

the correct password is not entered at the prompt.

Note:

To disable security, select "PASSWORD SET-

TING" in the main menu. At this point, you will

be asked to enter a password. Simply press

<Enter> to disable security. When security is

disabled, the system will boot, and you can

enter Setup freely.

This setting allows selecting an OS with greater than 64MB of RAM.

Commands are "Non-OS2" or "OS2."

This reports if an FDD is available for Windows 95. The commands are

"Yes" or "No."

PCA-6186 User's Manual

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents

Pca-6186