Creating A Power Schedule - NEC E988 User Manual

Creating a Power Schedule

The schedule function allows the monitor to automatically switch between power on and standby mode at different times.
To program the scheduleE: (Press the OK button on the remote control to switch between Enable (
1. Enter the [SCHEDULE] menu in the OSD menu.
a. Use the p/q buttons on the remote control to select [Current
Time settings]. Press the OK button on the remote control.
b. Set date and time to the monitor:
Press the t/u buttons on the remote control to move between
the fields.
c. Use the p/q buttons on the remote control to set the date and
time.
2. After setting the time, press the MENU button on the remote
control.
3. Use the p/q buttons on the remote control to select [Schedule
settings].
a. Press the OK button on the remote control. Use the t/u
buttons to navigate to the desired schedule number and press
the OK button to enable (
b. Press the q button on the remote control to navigate to the
schedule setting field.
Press the t/u buttons to navigate through each setting field.
To return to the schedule number setting, press the MENU
button.
c. Place the cursor on [Power On] and press the OK button on
the remote control to enable (
buttons on the remote control to move between the hours and
minutes fields.
Use the p/q buttons on the remote control to set the time.
d. Use the t/u buttons on the remote control to place the cursor on [Power Off] and then press the OK button on the remote
control to enable (
fields.
Use the p/q buttons on the remote control to set the time.
e. If a daily schedule is desired, choose [Every Day] using the t/u buttons and pressing the OK button to enable (
f. To set a schedule for a specific day, navigate the cursor to the desired day, [Mon - Sun], then press the OK button to
enable ( ) it. The schedule will run once on the selected day.
g. To repeat a schedule on the same day(s), place the cursor on [Every Week] and pressing the OK button to enable (
The schedule will run every week on the selected day(s) [Mon - Sun].
4. After setting the schedule, press the MENU button on the remote control to return to the previous menu or press the EXIT
button to close the OSD menu.
• The [Current Time Setting] needs to be set before adding schedules.


NOTEE:
• If multiple schedules are set, the monitor turns on or off according to the nearest time in the schedules.
• If the time settings of [Power On] and [Power Off] are the same, power on is given priority.
• When [Every Day] is selected, [Every Week] and [Mon - Sun] cannot be set.
• If the monitor remains for about two weeks or more with the power cord unplugged, the clock will not show the
correct time.
In this case, set the [Current Time settings] again.
Disable ( ).)
) it.
) [Power On]. Press the t/u
) [Power Off]. Press the t/u buttons on the remote control to move between the hours and minutes
: Enable
HDMI1
Schedule
Sleep Timer
Current Time settings
Schedule settings
Move
HDMI1
Schedule
Sleep Timer
Current Time settings
Schedule settings
Move
English - 44
: Disable
Year
Month
Day
Time
12
Select Return
OK MENU
Settings
1 2
•
Power On
•
Power Off
•
Every Day
•
Every Week
• •
Mon
• •
Fri
Select Return
OK MENU
) /
2022
12
15
34
EXIT
EXIT
3 4 5 6 7
12 00
12 00
• •
Tue Wed Thu
•
Sat Sun
EXIT
EXIT
) it.
) it.