Table of Contents
Advertisement
Video Settings
Video
Picture Mode
HDR Video
Dynamic
Standard
Energy Savings
Conferencing
HighBright
Custom
Advanced Video
Aspect Ratio
Normal
1:1
Full
Zoom
Overscan
Auto
On
Off
Dimming Setting
Off
Dynamic Backlight
Local Dimming
Provides pre-configured video settings suitable for various environments where this device
may be used, or customize settings to your preference.
Video setting for the HDR format. (Can be selected only when an HDR signal is input.)
High-contrast video setting.
Standard setting.
Video setting complying with International Energy Star standard.
Video setting suited for video conferences.
Maximum backlight brightness with higher color temperature for brighter ambient environments.
Customizable settings.
Menu used to adjust detailed video settings.
Select the aspect ratio of the screen image. For more information, see "Setting the Aspect
Ratio" in this manual.
• [Zoom] cannot be used when a 4K signal is input
NOTEE:
• [Zoom] cannot be used when an FHD signal is input.
Maximizes the size without changing the aspect ratio.
Shows the image in a 1 by 1 pixel format. (If the input resolution is higher than the
recommended resolution, the image will be scaled down to fit the screen).
Fills the entire screen even if the aspect ratio needs to be changed.
Fills the entire screen without changing the aspect ratio.
The areas of the image that are outside of the active screen area are not shown.
NOTEE:
Selects the image display area.
The image display area is set automatically.
Approximately 95 % of the image will be shown on the screen.
The whole image is displayed within the screen area. This setting may cause noise at the
edges of the screen depending on the signal.
When you use a computer with an HDMI output, set it to [OFF].
NOTEE:
The brightness of the backlight is optimized, while the contrast can be increased and the power
consumption reduced.
The backlight is not controlled.
Automatically adjusts the brightness level of the entire screen according to the input signal.
Automatically adjusts each of the clusters of the LCD backlight independently according to the
input signal.
English - 68
Advertisement
Table of Contents
