Hdmi-Cec Command - NEC E988 User Manual

HDMI-CEC Command

Connect an HDMI-CEC compatible device to the HDMI terminal.
OSD menu HDMI-CEC
command name
CEC One Touch Play
(Consumer
Electronics
Control)
Remote Control Pass
Through
Power Status
System Information
Auto Turn Off System Standby
Audio System Audio
Receiver Control
Search device Device OSD Name
Transfer
Routing Control
Depending on the connected device, sometimes the device does not work properly.

NOTEE:
Explanation
When an HDMI-CEC compatible device
is turned on, the monitor connected
to the device with an HDMI cable also
automatically turns on.
After the monitor powers on, Input
terminal automatically switches.
If the monitor is already turned on when
the HDMI-CEC compatible device is
turned on, it only changes the Input
terminal.
The monitor's remote control button
operation can function with HDMI-CEC
compatible devices connected with an
HDMI cable.
For example, part of the HDMI-CEC
compatible device menu can be operated
using the remote control.
The connected HDMI-CEC compatible
devices can obtain the monitor's power
status, such as if the monitor is in standby
mode or on.
This function obtains information from a
connected HDMI-CEC compatible device
(CEC version, physical address, etc.).
If the monitor is set to standby using the
remote control, the HDMI-CEC compatible
device connected with an HDMI cable
also goes into standby at the same time.
If the monitor goes into standby while
an HDMI-CEC compatible device is
recording, the device remains on.
Refer to the user's manual supplied with
the HDMI-CEC compatible device for
further information.
Connect audio equipment with the ARC
function to the HDMI1 (ARC) terminal
using the included ARC-supported HDMI
cable. The Volume buttons on the remote
control can control the volume of the
connected HDMI ARC audio equipment.
While this function is active, the monitor's
internal speakers are automatically set to
MUTE.
This function is used to obtain the name
of the connected devices.
By selecting a device name, the HDMI-
CEC compatible device input switches to
the input you selected. After selecting the
device, the remote control operates for
the selected device.
English - 30
Setting
HDMI1
Setup
CEC
Off
Auto Turn Off On
Audio Receiver
Device list
In the OSD menu, go to [Setup] -> [HDMI
Settings] -> and select [On] in [CEC].
In the OSD menu, go to [Setup] -> [HDMI
Settings] -> [CEC] and select [Enable] in
[Auto Turn Off].
In the OSD menu, go to [Setup] -> [HDMI
Settings] -> [CEC] and select [Enable] in
[Audio Receiver].
In the OSD menu, go to [Setup] ->
[HDMI Settings] -> [CEC] -> [Device list]
and press the OK button on the remote
control.