NEC E988 User Manual page 6

Handling the power cord.
Do not scratch or modify the cord.
• Do not place heavy objects on the cord.
PROHIBITED
• Do not let the weight of the product rest on the cord.
• Do not cover the cord with a rug, etc.
• Do not bend, twist or pull the cord with excessive force.
• Do not apply heat to the cord.
Handle the power cord with care. Damaging the cord could lead to fire or electric shock. If the
cord gets damaged (exposed core wires, broken wires, etc.), turn off the product's power, then
unplug the power cord from the power outlet. Ask your dealer to replace it.
Do not touch the power plug if you hear thunder.
Doing so could result in electric shock.
DO NOT TOUCH
Do not connect or disconnect the power cord with wet hands.
It may cause an electric shock.
DO NOT TOUCH
WITH WET HANDS
Please use the power cord provided with this product in accordance with the power cord table.
Do not exceed the product's specified power supply voltage where it is installed. Doing so could
REQUIRED
result in a fire or electric shock. Please refer to the power supply voltage information in the
specification.
If a power cord is not supplied with this product, please contact us. For all other cases, please use
the power cord with the plug style that matches the power socket where the product is located.
The compatible power cord corresponds to the AC voltage of the power outlet and has been
approved by, and complies with, the safety standards in the country of purchase.
This equipment is designed to be used in the condition of the power cord connected to the earth.
If the power cord is not connected to the earth, it may cause electric shock. Please make sure the
power cord is connected to the wall outlet directly and earthed properly. Do not use a 2-pin plug
MUST BE
EARTHED
converter adapter.
For proper installation it is strongly recommended to use a trained service person.
Failure to follow the standard installation procedures could result in damage to the product or
REQUIRED
injury to the user or installer.
Please install the product in accordance with the following information.
This product cannot be used or installed without the table top stand or other mounting accessory
REQUIRED
for support.
When transporting, moving, or installing the product, please use as many people as necessary
(at least four) to be able to lift the product by the four handles without causing personal injury or
damage to the product.
• In order to install the monitor on ceiling or wall, use a lifting device attached to the eyebolts.
Do not lift the product only by people. The product may fall causing personal injury.
• DO NOT use this product on the floor with the table top stand. Please use this product on a
table or with a mounting accessory for support.
Please refer to the instructions included with the optional mounting equipment for detailed
information about attaching or removing.
Do not cover the vent on the product. Improper installation of the product may result in damage to
the product, an electric shock or fire.
Do not install the product in the locations below:
• Poorly ventilated spaces.
• Near a radiator, other heat sources, or in direct sunshine.
• Continual vibration areas.
• Humid, dusty, steamy, or oily areas.
WARNING
English - 3