Locate And Record The Serial Number; Install The Storage System Hardware; Access The Storage System - HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS Server User Manual
Hp storageworks x1000 and x3000 network storage system user guide (5697-0185, november 2009)
Hide thumbs
Also See for X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS Server:
- User manual (68 pages) ,
- Release notes (10 pages) ,
- Installation instructions (3 pages)
Table of Contents
Advertisement
•
Power cord(s)
•
Product Documentation and Safety and Disposal Documentation CD
•
HP StorageWorks Storage System Recovery DVD
•
End User License Agreement
•
Certificate of Authenticity Card
•
Slide rail assembly
HP ProLiant Essentials Integrated Lights-Out 2 Advanced Pack
•
Locate and record the serial number
Before completing the installation portion of this guide, locate and write down the storage system's
serial number.
The storage system's serial number is located in three places:
•
Top of the storage system
•
Back of the storage system
•
Inside the storage system shipping box
Install the storage system hardware
1.
Install the rail kit by following the HP Rack Rail Kit installation instructions.
2.
If connecting to the storage system using the direct attach method, connect the following cables
to the back panel of the storage system in the following sequence: keyboard, mouse, network
cable, monitor cable, and power cable.
NOTE:
• The keyboard, mouse, and monitor are not provided with the storage system.
• The X1600 does not include PS/2 ports for connecting a keyboard and mouse. You
must use USB-compatible keyboard and mouse devices with this storage system.
3.
If connecting to the storage system using the remote management method, connect a network
cable to a data port, a network cable to the iLO 2 port, and power cable.
Access the storage system
Use either the direct connect or remote management method to connect to the storage system.
IMPORTANT:
Only the direct attach and remote management access methods can be used to install the storage
system. After the storage system installation process is complete and the system's IP address has been
assigned, you can then additionally use the remote browser and remote desktop methods to access
the storage system.
•
Direct attach — Connect a monitor, keyboard, and mouse directly to the storage system. This access
method is mandatory if your network does not have a Dynamic Host Configuration Protocol (DHCP)
server.
18
Installing and configuring the server
Advertisement
Table of Contents
