Table of Contents
Advertisement
External
IEEE 1394
Connectors
Figure 2-1. Layout of a Typical OHCI-Compatible PCI-to-IEEE 1394 Host Adapter.
WARNING
14 Interface Installation and Configuration
The layout of a typical host adapter is shown in Figure 2-1.
Turn off and disconnect the power to your computer and to any
peripheral devices before installing the host adapter. Refer to
your computer's documentation for specific instructions about
the installation of PCI adapters.
1. Remove the computer chassis cover to expose the expansion slots and
external access covers.
2. Locate an unused, unobstructed PCI bus expansion slot (Figure 2-2)
that supports bus mastering. (PCI bus slots are usually white or
ivory.) See your computer documentation to determine if the PCI slot
supports bus mastering.
12 VDC
Power Connector
Chapter 2
Advertisement
Table of Contents
