Specifications - NewMar PHASE THREE PT-14 Installation & Operation Manual

Three stage smart charger
Table of Contents

Advertisement

VI)

SPECIFICATIONS

Model
Input VAC (50-60 Hz.):
Input Amps @ Full Load:
@ 115 VAC
@ 230 VAC
P.F. Rating:
Output Voltage (Nominal):
Output Amps (Continuous):
Output Banks:
Battery Capacity (Amp-Hours):
Weight (Lbs./Kg.):
Compliance References:
Compliance References*:
CG
Ignition protected per USCG CFR 183.410
CE
Carries the CE Mark
* Numerous other Safety and EMC compliances may also apply. Contact
factory if further compliance information is required.
Temperature Rating (all models):
-10°C to +60°C; Derate linearly from 100% @ 50°C to 60% @ 60°C
Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation option
installed or at 22.2°C (72°F) with Temperature Compensation option installed):
Setting
Gel-Cell
Flooded/AGM
Temperature Compensation: - 5 mV per cell per ° C. Sensor supplied with 25' cable and plug-in connector
Remote Panel, Model RP: LED's indicate charger output stage. Button allows manual reinitialization of three
stage charge cycle. Supplied with 25' cable and plug-in connector. Panel dimensions: 3" H x 4.75" W
Protection (all models): Input/Output Fuses, Current Limiting, Thermal Protection, Forced Air Cooling, Drip
Shield
Case Size: (See dimensional drawings on page 19)
1 8
P.O. Box 1306
Newport Beach,
California 92663
PT-14
85-264
2.8
1.4
.95@230V
12
14
3
28-140
7.5
CG,CE
12 Volt Models
Charge
Float
@ 50 % load
@ .5 amp load
14.0V d.c.
13.6V d.c.
14.2V d.c.
13.4V d.c
www.newmarpower.com
PT-25
PT-24-8
90-132 or
85-264
180-264
6.5
2.8
4
1.4
.7
.95@230V
12
24
25
8
3
3
50-250
16-80
8.5
7.5
CG
CG,CE
24 Volt Models
Charge
@ 50 % load
28.0V d.c.
28.4V d.c.
PT-24-13
90-132 or
180-264
6.5
4
.7
24
13
3
26-130
8.5
CG
Float
@ .5 amp load
27.2V d.c.
26.8V d.c.
Phone: 714-751-0488
Fax: 714-957-1621
E-Mail: sales@newmarpower.com

Advertisement

Table of Contents
loading

Table of Contents