Springfree SF60E Manual page 13

Figure 7-C: The rod going into first socket
Figure 7-D: Sliding the enclosure net down
Figure 8: The rest of the rods inserted through the
enclosure holes and into the frame sockets
stripes
Figure 9: The mat placed inside the trampoline frame
Springfree Trampoline Model SF60E Trampoline and Enclosure Assembly, Installation, Care, Maintenance and Use Instructions Version 1.0
Put the rod through the net hole and back
into the socket hole you have located
(Figure 7-C).
Slide the net at the hole down to the bottom
of the rod. The first rod label should be facing
out (Figure 7-D).
Step 8: Inserting the remaining rods
Insert the remaining rods through each hole in
the bottom strip of the enclosure and into the
respective sockets (Figure 8).
Ensure the rods are seated right down to the
bottom of each socket.
Step 9: Placing the mat
inside the frame
When all rods are in place, put the mat inside
the frame with the jumping surface facing up.
The jumping surface has the colored stripes
sewn around the edge (Figure 9).
WARNING: Ensure rods are seated
right down to the bottom of each
socket. Rods that are improperly
seated may eject unexpectedly,
which may cause injury.
13