Installing the Hoses with a Trencher
Parts Required
1
1
1. Connect the short hardline to the long hardline and the 45-degree connector on the
hydra borer valve.
Note:
2. Remove and discard the 90-degree bukhead connector and short hose
coming from the trencher valve
3. Connect the long hose
side of the hydra borer valve
3462-340A
Short hardline
Long hardline
Ensure that the O-ring is in the hardline connector before making the connection.
coming from the plow valve to the 45-degree connector on the
G434345
.
G435779
.
Page 2–8
connector
Installation: Installing the Hoses