Installing the Hoses without a Trencher
Parts Required
1
1
1
1. Install the medium hardline to the 45-degree
connector on the hydraulic valve.
2. Connect the 90-degree union connector
the 18-inch hose.
3. Connect the 18-inch hose from the tandem
pump to the straight connector on the hydraulic
valve.
4. Fully tighten the hydraulic valve assembly
mounting hardware; torque the nuts to 23 to
29 N⋅m (17 to 21 ft-lb).
Installation: Installing the Hoses
Medium hardline
18-inch hose
90-degree union connector
G434258
to
G434287
Page 2–7
3462-340 A