Toro Maxi Sneaker 370 Operator's Manual page 12

Hydra borer vibratory plow

Hide thumbs Also See for Maxi Sneaker 370:

Table of Contents

Installing the Hoses with a Trencher (continued)

4. Connect the long hardline, from this kit, from the straight connector on the hydra borer

valve to the 45-degree connector on the trencher control valve.

5. Fully tighten the hydraulic valve assembly mounting hardware; torque the nuts to 23 to

29 N⋅m (17 to 21 ft-lb).

Installation: Installing the Hoses

G434428

Page 2–9

3462-340 A

Table of Contents

25532e 25532t