PROAIM P-LLBT-100 Assembly Manual

Hd 100mm bowl baby camera tripod stand w lever-friction and aluminum spreader

HD 100mm Bowl Baby Camera Tripod Stand w

Lever-Friction and Aluminum Spreader (P-LLBT-100)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Spanner Size: 13mm

Aluminum

Spreader

HD 100mm Bowl Baby Camera Tripod Stand

with Lever Friction

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the P-LLBT-100 and is the answer not in the manual?

Page 1 HD 100mm Bowl Baby Camera Tripod Stand w Lever-Friction and Aluminum Spreader (P-LLBT-100) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Aluminum Spreader Setup • Extend the Spreader on the floor and loosen all three knobs. NOTE: The Spreader attaches to the spiked legs of the spreader to provide precise customization of the tripod's length and stability. • After loosening the knobs, extend the Spreader per your requirement.
Page 3 100mm Bowl Baby Camera Tripod Stand Setup • Loosen all three adjustment knobs to set the desired height of the Stand. NOTE: One-stage telescopic design with friction knob extends up to 6 inches to capture low-angle shots, and conversely, it can be easily extended up to 34 inches for greater elevation.
Page 4 • Loosen the locking knob of the 100mm bowl fluid head (Not Included) and remove it. • Now, mount the fluid head on the Tripod Stand. • Tighten the locking knob to secure the fluid head. • Press the red locking lever of the fluid head (Not Included) to unlock it.
Page 5 YOUR PROAIM HD 100MM BOWL BABY CAMERA TRIPOD STAND W LEVER-FRICTION AND ALUMINUM SPREADER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.