Danfoss 140F1089 Installation Instructions Manual page 6

Combined view (default):
The combined view shows the status of both systems at
the same time. System A is shown on the upper display
line, and System B is shown on the lower display line.
This view gives the user a quick overview of all the systems.
Flipped view:
The flipped view shows the status of 1 system at a time.
The status of each system is shown for 5 seconds.
This view gives the user more detailed information about
each system.
The user can always press
irrespective of view selected.
Menu system
The menu system is navigated by the keys
No matter if the DEVIreg™ 850 controls one
or two systems, the look and use of the menu
system is always the same. This is obtained by
making the entry to each system in the main
menu. The possibilities and settings for each
system are first accessible after the user has
selected the desired system.
To the right is given an example of the main
menu and the menus for System A and
System B.
Please note, that only a few of the menus for each system are shown!
For a complete overview of the menu system, please refer to Appendix A: "Menu system".
6
to get more information about the current status
DEVIreg™ 850 IV
A: ROOF
B: GROUND
A: ROOF
>>STANDBY
B: GROUND
>>MELTING
and .
 
  
5s
 
5s

  

  

Only visible when System B is installed !
 

Installation instruction
  

  
 
System
A
 

  
 
System
B
 
