Table of Contents
Advertisement
DEVIreg™ 850 IV
Replacing a malfunctioning sensor
From the installer menu select Change system. The
system is searching for connected sensors.
The user selects the passive sensor, which should be
replaced with a new one.
Press
to loop through the found passive
sensors or to cancel replace sensor.
Press
when the correct passive sensor or
"Cancel replace sensor?" is selected.
If the user selected a passive sensor to replace, the user
should now select the new sensor.
Press
to loop through the found new sensors
or to cancel replace sensor.
Press
when the correct new sensor to add
is found or "Cancel replace sensor?" is selected.
If the user selected a new sensor to add, the replacing
of the sensors is performed.
Add an extra sensor
From the installer menu select Change system.
The system is searching for connected sensors.
Press
to loop through the found passive
sensors or to cancel replace sensor.
Press
when the correct new sensor to add
is found or "Cancel add sensor?" is selected.
If the user selected a new sensor to add, the sensor
is added.
Installation instruction
CHECKING SYSTEM
<-------->
REPLACE SENSOR:
SENSOR1 03FB2F
REPLACE SENSOR:
SENSOR2 03FC24
CANCEL REPLACE
SENSOR?
ADD SENSOR:
ID:
03ABC1
ADD SENSOR:
ID:
03DEF1
CANCEL REPLACE
SENSOR?
SENSOR REPLACED!
CHECKING SYSTEM
<-------->
ADD SENSOR:
ID:
03ABC1
CANCEL ADD
SENSOR?
SENSOR ADDED!
23
Advertisement
Table of Contents
