Specifications - MSA Ultima OPIR-5 Safety Manual

SPECIFICATIONS

Table 1 and Table 2 list specifications for the Ultima OPIR-5 Gas Detector. For a
complete list of specifications refer to the product instruction manual.
Instruction Manual
P/N
Operating
Temperature Range:
Humidity Range:
Input Voltage:
Supply Power
Supply Power
Table 1 – Environmental/Electrical Specifications
Mode
Fault
Startup
Set up
Gas Check
Beam Block
Standard Unit
0 to 5 LEL●meter
Heavy Hydrocarbon Unit
0 to 1 LEL●meter
Split Range
Over range
Table 2 – Analog Output Specifications (600 ohms max.)
Ultima OPIR 5 Detector
-67°F to 149°F
(-55°C to 65°C)
0 to 95% RH,
non-condensing
20 to 36 VDC
With Heater – 12 Watts
Source:
No Heater – 10 Watts
With Relays and Heater: 10 W
Receiver:
Relays, No Heater: 6 W
No Relays, with Heater: 8.5 W
No Relays, No Heater: 5 W
Ultima OPIR 5 Detector
(non-HART)
0 mA
0 mA
1.5 mA
0 or 1.5 mA
2 mA
4-20 mA
4-20 mA
4-12 mA for 0-5000ppm●m
(methane) or 0-2000
ppm●m (propane)
12-20 mA for 0-5 LEL●m
(methane) or 0-1 LEL●m
(propane)
21.7 mA
6
Ultima OPIR-5 Open Path Gas Detector
MANOPIR5
Ultima OPIR 5 Detector
(HART)
1.25 or 3.5 mA
1.25 or 3.5 mA
1.5 or 3.5 mA
1.5 or 3.5 mA
2 or 3.5 mA
4-20 mA
4-20 mA
4-12 mA for 0-5000ppm●m
(methane) or 0-2000
ppm●m (propane)
12-20 mA for 0-5 LEL●m
(methane) or 0-1 LEL●m
(propane)
21.7 mA
Safety Manual –