Advertisement

Quick Links

Storage Configuration
Towing Configuration
Contents
Important User Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
General � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
Manufacturer � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
Intended Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
Safety Precautions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
Unpacking the Cart � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Storage Configuration to Cart Configuration � � � � � � � � � � � � � � � � � 4
Cart Usage � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Visit the GearBoss TranSport Cart web page at wengercorp.com for more information.
Note:
Note:
©Wenger Corporation 2023
Wenger Corporation, 555 Park Drive, PO Box 448, Owatonna, Minnesota 55060-0448
Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com
Please read and understand these instructions before operating.
If you need additional information, contact Wenger Corporation using the information below.
Cart Configuration to Towing Configuration � � � � � � � � � � � � � � � � � 5
Towing Usage � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Cart Configuration to Table Configuration � � � � � � � � � � � � � � � � � � � 6
Table Usage � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Table Configuration to Storage Configuration � � � � � � � � � � � � � � � � 7
Mesh Wrap � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Transporting the Cart � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Replacement Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Printed in USA 2023-08
Operating Instructions
TranSport Cart
Cart Configuration
Table Configuration
Part #240A100-03

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GEARBOSS TranSport Cart and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wenger GEARBOSS TranSport Cart

  • Page 1: Table Of Contents

    Replacement Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12 Visit the GearBoss TranSport Cart web page at wengercorp.com for more information.
  • Page 2: Important User Information

    Wenger Corporation. Wenger Corporation does not assume any responsibility for any errors that may appear in this manual� In no event will Wenger Corporation be liable for technical or editorial omissions made herein, nor for direct, indirect, special, incidental, or consequential damages resulting from the use or defect of this manual�...
  • Page 3: Unpacking The Cart

    Unpacking the Cart 1� Remove the packaging lid� 2. Using two people, lift the cart out of the carton. Remove packaging lid 3. Place the cart onto its wheels and cut the nylon tie that secures the handle to the cart frame and rotate it upward.
  • Page 4: Storage Configuration To Cart Configuration

    Storage Configuration to Cart Configuration The cart is now in the Storage Configuration, to put the cart in the Cart Configuration: 1� Rotate the handle to a vertical position� 2. Undo the hook and loop strap and wrap around an end brace for storage. 3.
  • Page 5: Cart Configuration To Towing Configuration

    Cart Configuration to Towing Configuration 1� Pull out on the handle to release the lock position� 3. Rotate the handle downward. Note: End braces are shown folded down for clarity. 4. Replace the carriage bolt and wing nut. 2. Remove the carriage bolt and wing nut from the The cart is now ready to be attached to the towing handle�...
  • Page 6: Cart Configuration To Table Configuration

    Cart Configuration to Table Configuration It is recommended to use two people when converting the cart to the Table Configuration. To put the cart in the Table configuration: 1� Rotate the pull handle under the cart deck� 2. Lift the end braces and rotate them down to the ground. 3.
  • Page 7 Table Configuration to Storage Configuration It is recommended to use two people when converting the cart to the Storage Configuration. To put the cart in the Storage Configuration: 1. Grip side of cart near one end and lift (two people), rotating the end brace up to lay on the cart deck. 2.
  • Page 8: Mesh Wrap

    Mesh Wrap Install the optional mesh wrap to help secure contents while in the Cart Configuration. 1. Slide the mesh wrap over the end braces. 2. Secure the plastic brackets attached to the mesh wrap. Bracket Locations Mesh Wrap Bracket Locations Bracket Locations...
  • Page 9: Maintenance

    Note: If the cart is often stored outside, it may be necessary to apply oil every 6 months. • If paint gets chipped or scratched, apply touch-up paint� Call Wenger Customer Service for recommendations� Note: The deck of the cart is aluminum and will not rust if scratched.
  • Page 10: Transporting The Cart

    Transporting the Cart The cart may be loaded onto a truck or trailer if the following recommendations are observed: • Load and unload the cart from a loading dock if possible. • If a ramp is used, it should slope no more than 20 degrees (or 36%)� •...
  • Page 11 Replacement Parts 12 13...
  • Page 12: Replacement Parts

    Replacement Parts (continued) Item Description Item Description Deck 16 Handle Release Rod Bumper 17 Jam Lock Nut, 3/8-16 Rivet, 3/6" 18 Plastic Knob Loop Tube Weldment 19 Handle Rotate Tube Shoulder Bolt, 3/8-16 x 3/8" 20 Capscrew, 5/16-18 x 2-1/4" Lock Nut, 3/8-16 21 Upper Handle Weldment Wheel...

Table of Contents