Wenger Roll-A-Deck Kit Assembly Instructions

Stagetek staging system

CAUTION

Make sure anyone assembling or

installing StageTek components has

read and understands the instructions.

Visit the StageTek Staging System web page at wengercorp.com for more information.

Note:

©Wenger Corporation 2023

Wenger Corporation, 555 Park Drive, PO Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com

Basic Instructions only!

For more detailed product information, refer to the

StageTek Staging System Owner's Manual 280A099.

Always comply with Warnings

or Cautions in the instructions

or posted on the equipment.

Please read and understand these instructions before assembling or setting up.

If you need additional information, contact Wenger Corporation using the information below.

Roll-A-Deck Kit

StageTek

CAUTION

Printed in USA 2023-09

Assembly Instructions

Staging System

for

Part #280A553-03

Table of Contents

Need help?

Do you have a question about the Roll-A-Deck Kit and is the answer not in the manual?

Page 1 Visit the StageTek Staging System web page at wengercorp.com for more information. Note: Please read and understand these instructions before assembling or setting up. Note: If you need additional information, contact Wenger Corporation using the information below. ©Wenger Corporation 2023 Printed in USA 2023-09 Part #280A553-03 Wenger Corporation, 555 Park Drive, PO Box 448, Owatonna, Minnesota 55060-0448 Questions? Call..USA: (800) 4WENGER (493-6437) •...
Page 2 Assembly 1. Lay the StageTek deck upside down on a clean surface. Caster 2. Attach the leg assemblies. a. Insert the leg tube all of the way into each of the pocket assemblies. Tube b. Secure each leg tube by hand tightening the knob on every pocket assembly.