Mounting Instructions - Projecta PW500 Instructions Manual

OPERATING INSTRUCTIONS
To operate the inverter press the power button for 3 seconds.
To turn off, press the power button again for 3 seconds.
To help prevent the inverter being overloaded:
1. Allow the inverter to complete its start-up process when switched 'ON'.
2. Ensure appliances are turned off before turning the inverter on and;
3. If multiple appliances are being run, turn on one at a time.

MOUNTING INSTRUCTIONS

Pro-Wave inverters are designed for indoor, out of weather use only. During operation, the inverter
should be in a dry, cool and well-ventilated area as close to the batteries as possible, but not in the same
compartment as the batteries. Ensure the inverter is away from flammable materials and fumes.
The inverter base plate includes a mounting flange for easy mounting.
If permanently fixed, the inverter should be mounted to a suitable horizontal or vertical panel, with at
least 50cm clearance from the end plates to provide adequate ventilation for the cooling fan.
Part No.
PW500
PW1100
PW1600
PW2100
PW2700
269mm
300mm
390mm
419.5mm
Length
300mm
405.5mm
419.5mm
442.2mm
482.2mm
84.7mm
PW500
103.3mm
PW1600
Inverter Dimensions
Width
168.7mm
220mm
220mm
271.4mm
271.4mm
450mm
114.0mm
482.2mm
PW2700
Height
84.7mm
103.3mm
103.3mm
114mm
114mm
375mm
103.3mm
404.5mm
PW1100
410mm
114.0mm
442.2mm
PW2100
Weight
2.3kg
4.4kg
4.9kg
6.2kg
7.4kg
7