Advertisement
4. Wall Mounting
To mount the antenna to a wall or panel you will need the following supplied parts:
1 x Antenna
4 x Washers
The antenna must be mounted with the cables exiting downwards and should not be fitted directly on to metal walls.
Fit one half of the bracket to the antenna using the screws, nuts and washers provided.
Check the wall / panel to ensure that drilling in the chosen location will not damage any objects, wires or pipes within or behind the panel.
Using the other half of the bracket as a template, mark the hole positions ensuring that they are level. Drill pilot holes and then increase to
the appropriate hole size for the wall anchors / wall plugs that are being used. Fit the bracket to the wall using appropriate screws/anchors and
wall plugs.
Align antenna bracket plate with the wall mounted bracket half and fasten them together using supplied fasteners. Adjust the angle of the bracket
as required and tighten securely.
4.a
4.c
4.d
2 x Wall Bracket Plates
4 x Screws
4 x Spring Washers
2 x Nuts
4.b
Advertisement
