1. Introduction The WMM2G[G]-6-60 is a range of directional panel antennas for 4G/5G applications requiring support for 2x2 MiMo with optional GPS/GNSS. Ideal for branch or failover applications the antenna is suitable for external or internal mounting. The antenna is supplied as standard with a low profile wall mount bracket and a multi-tilt bracket for wall or mast mounting.
Page 4
CAUTION Parts of the antenna are an electrical conductor. Contact with power lines can result in death, or serious injury. Do not install the antenna where there is any possibility of contact with (or high voltage arc-over from) power cables. The antenna and supporting mast must not be close to any power lines during installation, removal or in the event that part of the system should accidentally fall.
Page 5
6. Routing and Terminating Coaxial Cable(s) Plan the coaxial cable route to the wireless device to avoid running adjacent to any existing electrical wiring and ensuring that they will not be subjected to damage. The antenna feeds consist of a low frequency element covering 617-960/1710-2700MHz and a high frequency element covering 2.7-6.0GHz.
Page 6
Wall Mount 4x4 MiMo Antenna with GNSS Antenna Manufacturer: Panorama Antennas Ltd 61 Frogmore, London, SW18 1HF, U.K This declaration is issued under the sole responsibility of the manufacturer The object of the declaration described above is in conformity with the relevant Union Harmonization...