Section Ii - Assembly Instructions - DR TLC18-CHP Operating & Assembly Instruction Manual

SECTION II - ASSEMBLY INSTRUCTIONS

CHIPPER
DISCHARGE CHUTE
HITCH ARMS
HITCH ASSEMBLY
PARTS BOX
TOOLS REQUIRED FOR ASSEMBLY
•
½" REGULAR BOX WRENCH
•
½" SOCKET AND SOCKET DRIVER
STEP I – UNPACKING AND CHECKING CONTENTS
1. Remove all items from the crate.
2. After unpacking the crate, compare the contents with the Package Contents list above.
3. If any parts are missing, contact Country Home Products at 800-376-9637.
4. Assembly should be done on a clean, level surface.
STEP II – ASSEMBLING THE CHIPPER HOPPER
1. Assemble chipper hopper (item #20) to the basic machine using four each 5/16"-18 x 3/4" carriage bolts (item
#19), 5/16" flatwashers(item #3), and 5/16"-18 nylock nuts(item #10),. Put head of bolt inside hopper with
threads sticking out. Tighten all hardware with a ½" wrench.
PACKAGE CONTENTS
SKID
CHIPPER HOPPER
SWIVEL TOP
DEFLECTOR
STAND ASSEMBLY
WIRE HARNESS
SAFETY GLASSES
10 EA – CABLE TIES
OWNER'S MANUAL
ENGINE MANUAL
BOLT BAG
KNIFE GAUGE
PARTS BOX
7 EA – 5/16-18 X ¾" CARRIAGE BOLTS
8 EA – 5/16-18 NYLOCK NUT
4 EA – 5/16 USS FLATWASHER
2 EA – ½-13 X 3" HHCS
4 EA – ½-13 X 1 ¼" HHCS
2 EA – ½-13 GRIPCO NUT
1 EA – 3/16 HAIR COTTER PIN
2 EA – HITCH ARM MOUNTING PLATES
2 EA – ENGINE KEY
2 EA – 5/16-18 X ¾" HHCS
3 EA – 3/8" USS FLATWASHER
1EA – LOCKING KNOB
11
BOLT BAG