Wheels, Tires; Removing The Front Wheel; Installing The Front Wheel - KTM 390 DUKE 2022 Owner's Manual

14 WHEELS, TIRES

14.1
14.2
74

Removing the front wheel

F00863-10

Installing the front wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
F00864-10
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
Main work
–
1
Remove screws with washers and push the fender slightly
to the side.
–
2
Remove screw and pull wheel speed sensor
hole.
–
4
Loosen screw by several rotations.
–
5
Loosen screws .
–
4
Press on screw to push the wheel spindle out of the axle
clamp.
–
4
Remove screw .
Warning
Danger of accidents Damaged brake discs reduce the
braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Hold the front wheel and remove the wheel spindle. Take the
front wheel out of the fork.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Remove the spacers.
–
Clean and grease shaft seal rings
of the spacers.
Long-life grease ( p. 119)
–
Insert the spacers.
p. 56)
p. 56)
3
out of the
1 A
and contact surfaces