Front Cover - Follett Horizon Elite HCD1810RBS Installation Instructions Manual

Install front cover to ice machine.
8.1
Install condensing unit
• Complete installation of condensing unit
or connection to rack system.
• Required rack system capacity at 0 F
(-18 C) evaporator (EPR supplied by
installer).
1810N: 15,700 Btu/hr (3956 kcal/hr)
2110N: 18,200 Btu/hr (4586 kcal/hr)
Consult Operation and Service Manual provided with ice machine for sanitizing instructions.
12
NOTICE
Ice machine MUST be sanitized prior to operation!
self-contained
8.2
Install ice machine front cover
➋
• Slide ice machine cover over machine
ensuring that tabs on back of cover
slip under louvers on back of docking
assembly ➊
• Insert and tighten two screws through
cover and into docking assembly
BIN • RIDE Technology
8

Front cover

➊
➋