Working With Detergents - Kärcher K 2 Car Care Kit Operator's Manual

WORKING WITH
DETERGENTS
For best results see Cleaning Tips for
specific information on how to clean
different surfaces.
Always Use Kärcher
Best Results
Kärcher biodegradable detergents are
®
specially formulated to protect the envi-
ronment and your pressure washer. The
special formula won't clog the suction
tube filter and will protect the internal
parts of the pressure washer for a longer
life. For Kärcher ®
your retailer or visit our website:
www.buykarcher.com
CAUTION
Never use:
Bleach, chlorine products and other
–
corrosive chemicals
Liquids containing solvents (i.e.,
–
paint thinners, gasoline, oils)
Tri-sodium phosphate products
–
Ammonia products
–
Acid-based products
–
These chemicals will harm the unit and
will damage the surface being cleaned.
Use of these items will void the war-
ranty.
STEP 1:

Detergents can only be applied at
low pressure.
Install the Vario Power Spray Wand.
Set the spray wand to the low pres-
sure setting (Mix).
OR
Install the Wash Brush.
® Detergent for
detergents, check
STEP 2:

Fill a container with Kärcher deter-
gent. Place the filter end of detergent
siphon tube into the container.
STEP 3:

Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
STEP 4:

To rinse, insert the spray wand and
pull trigger to operate unit.
STEP 5:

Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
remaining detergents from the injec-
tion system.
English 9