Table of Contents
Advertisement
38
en | Camera
Polarity
Select Normal or Inverted to invert the colors.
Polarity of Normal causes hot temperatures and cold temperature to act as described in
Thermal mode.
Polarity of Inverted inverts the operation of the thermal mode. The color/gray scale normally
for hot objects applies instead to cold objects. The color/gray scale normally for cold objects
applies instead to hot objects.
6.7
Lens Settings
Autofocus
Continuously adjusts the lens automatically to the correct focus for the sharpest picture.
–
–
–
Focus speed
Use the slider (from 1 to 8) to control how fast the Auto focus will readjust when the focus
becomes blurred.
IR focus correction
Optimizes the focus for IR lighting. Options are: On, Off (default).
Day near limit [m]
Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the day.
Night near limit [m]
Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the night.
Auto iris
Automatically adjusts the lens to allow the correct illumination of the camera sensor. This type
of lens is recommended for use where there are low light or changing light conditions.
–
–
Auto iris level
Increases or decreases brightness according to the amount of light. Type a value between 1
and 15.
Maximum zoom speed
Controls the zoom speed.
Zoom limit
Select the appropriate limit for zooming the camera: 20x, 30x.
Digital zoom
Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital
video image. It is accomplished electronically, without any adjustment of the camera's optics,
and no optical resolution is gained in the process.
Select Standard (default) to enable this feature in standard mode.
2017.11 | 0.20 | F.01U.349.011
One Push (default; commonly called "Spot Focus"): activates the Auto Focus feature after
the camera stops moving. Once focused, Auto Focus is inactive until the camera is moved
again.
Auto Focus: Auto Focus is always active.
Manual: Auto Focus is inactive.
Constant (default): camera constantly adjusts to varying light conditions (default).
If you select this option, the camera makes the following changes automatically:
–
Gain Control: switches to AGC.
–
Shutter Speed: switches to default.
Manual: camera must be manually adjusted to compensate for varying light conditions.
User Manual
MIC IP fusion 9000i
Bosch Security Systems
Advertisement
Table of Contents
