Related Manuals for Beko WUE6512XBA
Summary of Contents for Beko WUE6512XBA
- Page 1 Washing Machine User’s Manual WUE6512XBA Document number: 1911860058_UA/ 13-09-20.(14:22)
-
Page 2: General Safety Instructions
1 General safety instructions • While there is still water inside the product, never open the This section includes security loading door or remove the filter. instructions which may help prevent Otherwise, risk of flooding and the injuries and material damage risks. injury from hot water will occur. -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used by room where the product is the children who are at the located. age of 8 and over and the •... -
Page 4: Important Instructions For Environment
2. Important instructions for DANGER! environment • Plug the product into a 2.1 Compliance with WEEE Directive grounded outlet protected by This product complies with EU a 16 A fuse. Do not neglect to WEEE Directive (2012/19/EU). This product bears a classification have the grounding installation symbol for waste electrical and made by a qualified electrician. -
Page 5: Technical Specifications
4 Technical specifications Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WUE6512XBA Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 0,730 Energy consumption of the standard 60°C cotton programme at partial load (kWh) -
Page 6: Appropriate Installation Location
4.1 Installation 4.1.3 Removing the transportation locks • Apply to the nearest authorised service agent for the installation of your product. 1 Loosen all bolts with an appropriate wrench until they turn freely. • Preparation of the location and electrical, tap water and waste water installations at 2 Remove the transport safety bolts by the place of installation is under customer's... -
Page 7: Connecting The Drain Hose To The Drain
• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure. -
Page 8: Electrical Connection
4.2 Preparation 4.1.7 Electrical connection Connect the product to a grounded outlet 4.2.1 Sorting the laundry protected by a 16 A fuse. Our company shall * Sort laundry according to type of fabric, not be liable for any damages that will arise color, and degree of soiling and allowable when the product is used without grounding in water temperature. -
Page 9: Loading The Laundry
• Operate the product in the highest The detergent drawer capacity allowed by the programme you have selected, but do not overload; see, is composed of three "Programme and consumption table". See, compartments: “Programme and consumption table" – (1) for prewash •... - Page 10 Using gel and tablet detergent • Do not use amounts exceeding the dosage quantities recommended on the detergent • If the gel detergent thickness is fluidal and package to avoid problems of excessive your machine does not contain a special liquid foam, poor rinsing, financial savings and detergent cup, put the gel detergent into the finally, environmental protection.
-
Page 11: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woolens/Silks (Recommended (Recommended (Recommended (Recommended temperature temperature range based temperature range temperature range based range based on on soiling level: cold-40 based on soiling on soiling level: 40-90 oC) soiling level: cold level: cold -30 oC) -40 oC) -
Page 12: Operating The Product
4.3 Operating the product 1 - Programme Selection knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - Delayed Start Button 4 - Programme Follow-up indicator 5 - Start / Pause button 6 - Auxiliary function button 3 7 - Auxiliary function button 2 8 - Auxiliary function button 1 9 - Spin Speed Adjustment button... -
Page 13: Main Programmes
• Synthetics • : Selectable You can wash your laundry (such as shirts, * : Automatically selected, no canceling. blouses, synthetic/cotton blended fabrics etc.) ** : Energy Label programme (EN 60456 Ed.3) in this programme. The programme duration ***: If maximum spin speed of the machine is gets notable shorter and washing with high lower then this value, you can only select up performance is ensured. - Page 14 • Hygiene • Dark Care/Jeans Applying a steam step at the beginning of the Use this programme to protect the colour programme allows to soften the dirt easily. Use of your dark-coloured garments or jeans. this programme for your laundry (baby clothes, It performs high performance washing bed sheets, bedlinen, underwear, etc.
- Page 15 4.3.7 Special programmes Rinse hold For specific applications, select any of the If you are not going to unload your clothes following programmes. immediately after the programme completes, you can use rinse hold function to keep your laundry • Rinse in the final rinsing water in order to prevent them Use when you want to rinse or starch separately.
-
Page 16: Auxiliary Functions
4.3.10.1 Auxiliary functions INFORMATION • Prewash A Prewash is only worthwhile for heavily soiled • This is not a washing programme. laundry. Not using the Prewash will save It is a maintenance programme. energy, water, detergent and time. • Do not run the programme when there is something in the machine. - Page 17 Canceling the Delayed Start function INFORMATION If you want to cancel the delayed start countdown • In addition to the method above, to and start the programme immediately: deactivate the Child Lock, switch the 1. Set the Delayed Start period to zero or turn the Programme Selection knob to On / Off Programme Selection knob to any programme.
- Page 18 4.3.14 Loading door lock 5. Make changes in auxiliary functions, temperature and speed settings if necessary. There is a locking system on the loading door of the machine that prevents opening of the loading 6. Press Start / Pause button to start the machine. door in cases when the water level is unsuitable.
-
Page 19: Maintenance And Cleaning
4.4 Maintenance and cleaning If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick. Service life of product extends and frequently experienced problems will be reduced if it is INFORMATION cleaned at regular intervals. •... -
Page 20: Draining Remaining Water And Cleaning The Pump Filter
4.4.5 Draining remaining water 3 Follow the below procedures in order to drain water. and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric The product does not have an emergency fibers clogging the pump impeller during water drain hose, in order to drain the water: discharge of washing water. -
Page 21: Troubleshooting
5 Troubleshooting Machine directly discharges the water it takes in. • Draining hose might not be at adequate height. >>>Connect the water draining hose as described in the Program does not start after closing the door. operation manual. • Start / Pause / Cancel button was not pressed. >>>*Press No water can be seen in the machine during the Start / Pause / Cancel button. - Page 22 Machine does not switch to spinning step. (*) Colour of the clothes faded. (**) • There might be unbalanced load in the machine. • Excessive laundry was loaded in. >>>Do not load the >>>Automatic unbalanced load detection system might machine in excess. be activated due to the unbalanced distribution of the •...
- Page 23 Laundry remains wet at the end of the programme. • There is a problem with the detergent drawer valves. >>>Call the Authorised Service Agent. • Detergent might be mixed with the softener. >>>Do not • Excessive foam might have occurred and automatic foam mix the softener with detergent.
- Page 24 1911860058_AD_EN...