KVH Industries TracVision HD7 Installation Instructions Manual page 15

Continued
11
Connect Receivers/DVRs to the Splitter
Now you need to connect the receivers and/or
DVRs to the splitter. Consider the following
connection guidelines before you begin:
• Refer to the basic wiring diagrams in
Figure 23 and Figure 24.
• Since the 8-way splitter supports up to 8
tuners, you can connect any number of SWM
receivers/DVRs that adds up to 8 tuners or
less.
• Each receiver has a single tuner, and requires
one RF cable. Each DVR has two tuners, and
requires one RF cable.
• If you need to connect more than 8 receivers
or 4 DVRs, please contact KVH Technical
Support.
• Connector labeling might vary between
receiver and DVR models. Refer to the User's
Guide for your selected receivers/DVRs for
complete information.
• Always terminate any unused splitter
connectors with a supplied terminator (see
Figure 22 on page 14).
Wire for DIRECTV Service
Figure 23 Basic SWM Receiver Wiring Diagram
From Power
Inserter's IRD
Connector
8-Way Splitter
Supports up to 7 Additional Tuners
Each SWM Receiver = 1 Tuner
Each DVR = 2 Tuners
Figure 24 Basic SWM DVR Wiring Diagram
From Power
Inserter's IRD
Connector
8-Way Splitter
Supports up to 6 Additional Tuners
Each SWM Receiver = 1 Tuner
Each DVR = 2 Tuners
Vessel
AC Ground
Satellite In
DIRECTV
(SWM-1)
H23 Receiver
COMPONENT OUT
DIGITAL AUDIO
OUT OPTICAL
S-VIDEO OUT
USB
AUDIO OUT
Vessel
AC Ground
Satellite In 1
DIRECTV
(SWM-2)
HR23 DVR
COMPONENT OUT
DIGITAL AUDIO
OUT OPTICAL
S-VIDEO OUT
USB
AUDIO OUT
Leave 1 unused connector
for each DVR you connect
ETHERNET PHONE JACK
HDMI OUT
ETHERNET PHONE JACK
HDMI OUT
15