KVH Industries TracVision HD7 Installation Instructions Manual page 12

Continued
9
Option B - Horizontal Mounting
a. Using a #1 Phillips screwdriver, remove the
six screws securing the rack mounting
brackets to the sides of the ACU (see
Figure 16).
b. Using a #1 Phillips screwdriver, secure the
mounting brackets to the sides of the ACU in
the bracket orientation for your installation
(see Figure 17 or Figure 18). Then secure the
mounting brackets using four supplied #6-32
Phillips screws and #6 washers.
c. Using fasteners appropriate for the mounting
surface, secure the ACU to the mounting
surface using the four mounting bracket
holes.
12
Mount the ACU
Figure 16 ACU Rack Mounting Bracket Removal
Rack Mounting
Bracket (x2)
Screw (x6)
Figure 17 Horizontal Mounting Bracket Orientation
Horizontal Mounting
Bracket (x2)
Figure 18 Horizontal Mounting Bracket Orientation
Horizontal Mounting
Bracket (x2)
#6-32 Screw and
#6 Washer (x4)
#6-32 Screw and
#6 Washer (x4)