KVH Industries TracVision HD7 Installation Instructions Manual page 19

Continued
13
Changing Network Settings
Choose one of the methods below if you need to
change network settings:
• Option A - Use the Web Interface
(Recommended)
• Option B - Use the ACU Buttons
Option A - Use the Web Interface (Recommended)
Follow the instructions below to use the web
browser on your PC to change network settings.
NOTE: If you have difficulty accessing the web
interface, you might need to adjust your PC's
connection settings. Refer to Appendix A on page 25
for more information.
a. Using a PC connected to the vessel's network,
open the web browser.
b. Enter the ACU's IP address into the web
browser's address bar (Figure 29).
c. Log in to the web interface using the
username and password below (see
Figure 30).
username: admin
password: password
d. Select the Settings tab. Then choose Edit to
modify the desired network settings (see
Figure 31).
Connect the ACU to the Network
Figure 29 Entering the IP Address (Example)
Enter the ACU's IP Adress Here
Figure 30 Web Interface Login Screen
Figure 31 Network Settings on the Web Interface
Login Information
admin
password
Select to Edit
Current
Settings
19