Configuring Non-Swm Receivers - KVH Industries TracVision HD7 Installation Instructions Manual

C

Configuring Non-SWM Receivers

Follow the steps below to set the TracVision HD7
system to use your selected satellite service, and/
or configure the non-SWM receivers for use with
the TracVision HD7 system.
Step 1 - Set the Desired Satellite Service
Follow these steps to set the TracVision HD7
system for the satellite service provider of your
choice.
Option A - Use the Web Interface (Recommended)
Follow the instructions below to use the web
browser on your PC to select the desired satellite
service provider.
a. Open your web browser.
b. Enter the ACU's IP address into the web
browser's address bar. Then press Enter (see
Figure 46).
c. Log in to the web interface using the
username and password below (see
Figure 47).
username: admin
password: password
d. Select the Settings tab. Then choose
Advanced Settings (see Figure 48).
e. Select the desired satellite service provider.
Then choose Change Service (see Figure 48).
Figure 46 Entering the IP Address (Example)
Enter the ACU's IP Adress Here
Figure 47 Web Interface Login Screen
Login Information
Figure 48 Advanced Settings
Select
to Edit
admin
password
33