Specifications; Intended Use - Makita DTW300 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Fastening capacities Standard bolt
High tensile bolt
Square drive
No load speed (RPM) Max impact mode
Hard impact mode
Medium impact mode
Soft impact mode
Impacts per minute Max impact mode
Hard impact mode
Medium impact mode
Soft impact mode
Overall length
Rated voltage
Net weight
•
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Charger
•
WARNING:
Only use the battery cartridges and chargers listed above.

Intended use

The tool is intended for fastening bolts and nuts.
Noise
ing to EN62841-2-2:
Model DTW300
Sound pressure level (L ) : 97 dB(A)
pA
Sound power level (L ) : 108 dB (A)
WA
Model DTW301
Sound pressure level (L ) : 97 dB(A)
pA
Sound power level (L ) : 108 dB (A)
WA
NOTE: The declared noise emission value(s) has been
measured in accordance with a standard test method
NOTE:
DTW300
M10 - M20
M10 - M16
0 - 3,200 min
0 - 2,600 min
0 - 1,800 min
0 - 1,000 min
0 - 4,000 min
0 - 3,400 min
0 - 2,600 min
0 - 1,800 min
D.C. 18 V
1.5 - 1.8 kg
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
-
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).
4 ENGLISH
DTW301
12.7 mm
-1
-1
-1
-1
-1
-1
-1
-1
144 mm
-