Operation - Makita DTW300 Instruction Manual

Installing or removing impact socket
Optional accessory
CAUTION:
Make sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
CAUTION:
After inserting the impact socket,
do not use it.
NOTE:
Tool with the ring spring
Model DTW300
For impact socket without O-ring and pin
Fig.10: 1. Impact socket 2. Square drive 3. Ring
spring
Push the impact socket onto the square drive until it
locks into place.
For impact socket with O-ring and pin
Fig.11: 1. Impact socket 2. O-ring 3. Pin
Move the O-ring out of the groove in the impact socket
and remove the pin from the impact socket. Fit the
impact socket onto the square drive so that the hole in
the impact socket is aligned with the hole in the square
drive.
Insert the pin through the hole in the impact socket and
square drive. Then return the O-ring to the original posi-
tion in the impact socket groove to retain the pin.
To remove the impact socket, follow the installation
procedures in reverse.
Tool with the detent pin
Model DTW301
Fig.12: 1. Impact socket 2. Hole 3. Square drive
4. Detent pin
Align the hole in the side of the impact socket with the
detent pin on the square drive and push the impact
socket onto the square drive until it locks into place. Tap
hard to remove, depress the detent pin while pulling the
impact socket.
Installing hook
CAUTION:
When installing the hook, always
Fig.13: 1. Groove 2. Hook 3. Screw
This can be installed on either side of the tool. To install
the hook, insert it into a groove in the tool housing on
either side and then secure it with a screw. To remove,
loosen the screw and then take it out.

OPERATION

CAUTION:
all the way until it locks in place.
red indicator on the upper side of the button, it is not
Fig.14
the bolt or nut. Turn the tool on and fasten for the proper
fastening time.
the kind or size of the bolt, the material of the workpiece
to be fastened, etc. The relation between fastening
Proper fastening torque for standard bolt
1. Fastening time (second) 2. Fastening torque
Proper fastening torque for high tensile bolt
If not, the hook
1. Fastening time (second) 2. Fastening torque
10 ENGLISH
Always insert the battery cartridge