Table of Contents
Advertisement
EN
Grinding
WARNING! During operation fine dust will be generated!
Some dusts are highly inflammable and explosive! Do not smoke during
operation, keep heat sources and open flames out of the working area!
Always wear a dust mask to protect yourself against hazards resulting
from fine dust!
NOTE: Do not turn the switch on or off while the product is in contact
with the workpiece. It will decrease switch life and could cause damage
to the workpiece.
1. Tilt the product at a 10° to 15° angle for easy handling and smooth grinding
(Fig.
18).
2. Apply the wheel to the work surface with a light, steady pressure for
maximum grinding efficiency. It should never be necessary to force the
product. The weight of the product applies adequate pressure.
3. Excessive pressure will overload the motor, slow the grinding action, put
dangerous stress on the wheel and causes breakage.
4. Move the product back and force steadily
32
10° - 15°
Fig. 18
TTB878GRD by TITAN
(Fig.
19).
Fig. 19
Advertisement
Table of Contents
