Table of Contents
Advertisement
TTB878GRD by TITAN
General operation
1. Check the product, its power cord and plug as well as accessories for
damage before each use. Do not use the product if it is damaged or shows
wear.
2. Double check that the accessories and attachments are properly fixed.
3. Always hold the product on its front and rear handles. Keep the front and rear
handles dry to ensure safe support.
4. Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
5. Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete
stop before putting it down.
6. Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
7. Grip the product securely with two hands so you have full control at all times.
The starting torque creates a sudden jerk.
8. Wait until the wheel has reached its full speed before applying it to the
workpiece.
9. Always be aware of kickback, ensure stable footing.
10. Secure the workpiece properly, e.g. with a clamping device or a vice.
EN
EN
Operation
31
Advertisement
Table of Contents
